Down
Windows / Mac OSX

Xhun Audio LittleOne v3.2.1 [WiN, MacOSX]

Xhun Audio LittleOne
Team R2R | 29 April 2020 | WiN: 14 MB | MAC: 12 MB
LittleOne is a faithful software emulation of one of the most legendary and appreciated hardware analog synthesizers.

In addition to an accurate re-creation of the original signal path, every single component inside LittleOne (oscillators, filter, envelopes, etc.) prove the same original architecture, frequency response and operative range of its analogue hardware counterpart, producing a deep, rich and warm sound.

Add to the equation a full rack with a 16-step analogue sequencer, a 16-step trancegate effect, two insert/master effects slots and the result is a complete, true-analogue-sounding setup within the comfort of a modern digital studio.

► Features

Analogue modeling simulation of real analogue hardware, achieved by the adoption of the Advanced Component Simulation (ACS) approach - oscillators, filters, envelopes (,...) are built preserving their original architecture, featuring all the micro-instabilities and imperfections of the analogue technology

Full 64-bit processing accuracy for every single aspect of the simulation

An all-in-one complete analogue synthesizer + sequencer + trancegate + rack effects setup

Two aliasing-free analogue modeled oscillators proving the same capacitors' charging/discharging responses as found on the original analogue circuits, with a continuous wave selection (morphing) mode between triangle, sawtooth, square, pulse

A legendary 4-pole resonant low pass ladder filter (modeled by the adoption of the topology-preserving transform / zero-delay feedback approach) proving all the original non-linearities, frequency responses (also at extreme modulation scenarios), self-oscillation, soft-clipping and overload control

Two 4-stage (ADSR) envelope generators proving the same capacitors' charging/discharging responses as found on the original analogue circuits

Extended modulation possibilities, including a white noise generator, a sample-and-hold source and a multi-waveform low-frequency-oscillator (LFO) featuring the original frequency range (from 0.2 Hz up to 500 Hz), allowing for advanced frequency modulation designs

True analogue polyphony. In addition to a classic monophonic mode, polyphony (4-voices) is achieved by simulating four fully-independent synthesis systems (devices) separately, as expected in the original hardware specification extension. Each of the four independent voices (devices) can also be tuned/detuned separately for an even more deep and rich polyphonic sound

Analogue components selector. Choose what kind of components to use inside LittleOne : select ultra-stable components, phase-locked oscillators (like in most recent analogue synthesizers) or select aged, much more unstable components and disable the phase-lock of the main oscillators

Accede all the advanced features like the alternative modulation sources/destinations, set the velocity to control the filter cutoff, extend the pitch bend range, select the MIDI input channel and much more - all from the operating system led display

Including XSQ16A unit (rack), a monophonic 16-step analogue sequencer

Including GAT3D unit (rack), a 16-step trancegate effect

Including two insert/master effects slots with the possibility to choose :

X-TREME unit (rack), an accurately modeled, ground-shaking tube distortion effect

FLANG-R unit (rack), an expressive stereo flanger effect

CHOR-S unit (rack), an expressive stereo chorus effect

D-LAY unit (rack), a tempo-synced stereo delay effect

REEVERB unit (rack), a resonator-based electronic reverb effect

Including a huge 400+ ready-to-use factory presets collection covering all styles, from vintage analogue leads and basses to frequency modulation sequences, contemporary cutting-edge electronic motion pads, trance stabs, complex psychoacoustic constructions, percussive and special sound effects. All the original Little Phatty¹ factory patches (Stage Edition and Tribute Edition) are also included

Additional presets/patches available as commercial expansions

MIDI automation, with CC# mapping following the original Little Phatty¹ MIDI CC# specs

Supported sample rates from 44.1 kHz up to 192 kHz

Xhun Audio has updated LittleOne, the analogue modeling synthesizer, to version 3.2.1.

This update brings full support for all the new Expansions for LittleOne recently released by Xhun Audio, as well as minor compatibility improvements for the previously released Tension Peaks Expansion.

Changes:

Support for the newly released Lone Raiders Expansion.
Support for the newly released Mono Scapes Expansion.
Support for the newly released Tribe Tronics Expansion.
Fix for the previously released Tension Peaks Expansion.


Team R2R Note: (v3.2.1)
BigSteps Expansion is included.


home page


Only registered users can see Download Links. Please register or login.
RATING
+12

Comments

  • montoto
    registered
    17.12.2017
    1 April 2019 22:18
    • Domo arigato !
       
  • PokaFutuna
    registered
    23.01.2018
    29 April 2020 15:39
    • Thanks but no sound... ???
       
  • ehood66
    registered
    18.03.2018
    29 April 2020 17:16
    • to authorize
      Place littleone_data.zip in
      • Windows Vista / 7 / 8 / 10 :
      C:\Users\Public\Documents\XhunAudio\LittleOne\Data\littleone_data.zip
      • Windows XP :
      C:\Documents and Settings\All Users\Documents\XhunAudio\LittleOne\Data\littleone_data.zip
      • macOS :
      ◦ /Users/Shared/XhunAudio/LittleOne/Data/littleone_data.zip
       
5
...

Information

Users of Guest are not allowed to comment this publication.