Spectrasonics Omnisphere Software and Patches Update v2.8.0d / v2.8.0c [WiN, MacOSX]

P2P | 26 October 2021 | 327 MB

Omnisphere® is the flagship synthesizer of Spectrasonics - an instrument of extraordinary power and versatility. Top Artists all over the world rely on Omnisphere as an essential source of sonic inspiration. This award-winning software brings many different types of synthesis together into one amazing-sounding instrument that will spark a lifetime of exploration.

Omnisphere Software 2.8.0d (Version History)
Includes the following features and fixes:

Sonic Extensions compatibility
New Arpeggiator features:

New “Strum” step modifiers simulate guitar strumming. Specially featured in the “Nylon Sky” Sonic Extension, these modifiers can be used in any patch in Omnisphere
New "Humanity" knob controls the amount of randomization applied to individual note start times
New "Dynamics" knob controls the amount of randomization applied to individual note velocities
New Modulation Targets: Arp Humanity and Arp Life
Adds value-snapping detents for the Envelope ADR parameters on the Layer Pages and Custom Controls. Detents are only added when the Envelopes are host-synced. Holding down Shift while dragging the ADR controls allows continuous value adjustments
Fixes issue where the Harmonia Mix parameter value could be wrong after loading a patch
Fixes issue in Shared Signal Path mode where disabling Layer A could create clicking noises in audio from Layers B-D
Fixes zippering artifacts for the Aux Return parameter on the Part Effect Racks
Fixes issue where simultaneously changing the Soundsource "Reverse" parameter for 2 or more layers could cause loading failures
Fixes issue in Shared Signal Path mode where disabling Layer A caused the Ring Mod effect to sound incorrect on Layers B/C/D
Fixes issue where Key Tracking and other sources would not work when Solo mode is On
Fixes issue where Filter Key Tracking in Solo mode did not handle release events properly
Fixes issue where changing the Master Filter cutoff and resonance simultaneously could corrupt the audio output
Fixes issue where the Master Filter was adding audible lowpass filtering at host sample rates above 44.1kHz
Fixes issue where LFO rate was incorrect after changing the sample rate
Fixes issue where envelope parameter data was loaded incorrectly for some patches
Fixes issue in Arpeggiator where Step Dividers, in conjunction with Chord mode, did not play properly
Fixes issues with Arpeggiator preset menu
Fixes crash in Live Mode pane that could occur when rearranging Parts
Fixes crash that could occur when a Soundsource started playing for the first time
Fixes Patch Browser synchronization issue where the Category filter could be incorrectly reset to "All" while changing patches
Fixes issue in Browsers where exiting Sound Match mode did not return to correct prior patch library
Fixes issue where the wrong Mini-Browser could sometimes be shown after closing the full multi-browser
Fixes issue where Browser’s rating stars could be overwritten by “MIDI Learn” text sometimes
Fixes issue where switching patches could cause audio glitches
Fixes issue where arrow steppers on mini browser pane could step thru patches when mini multi browser was displayed
Fixes issue where note timing adjustments made to the Trigger Mode setting were incorrectly scaled by the Clock Speed parameter
Fixes issue where setting polyphony (# voices) to 64 could cause the plugin to stop responding to Note On events
Fixes issue where modulation highlight graphics for GUI controls did not always get reset after a patch load
VST3: Fixes issue where "Enter Value" feature for manually typing in automation values did not work
VST3: Fixes issue where host automation values changed after closing/opening the GUI
VST3: Fixes issue where VST3 Hosts added a resizing handle to the VST3 plugin GUI
VST3: Fixes issue where changing the Clock Speed parameter did not work properly
Mac Only: Fixes issue where modulation highlight images were not getting drawn for some knob-style controls
Windows Only: Fixes graphics rendering issues for images displayed on the Custom Pane
Windows Only: Omnisphere Standalone app updated to v1.1.0d. Resolves Windows system DLL loading issue

Includes the following features and fixes:

Adds Arpeggiator presets using new "Strum" modifiers

home page

Only registered users can see Download Links. Please register or login.

RATING

Legend

Comments

registered
10.12.2020

jus3sixty

26 October 2021 20:53
- If I Knew You Were Comin' I'd've Baked a Cake

registered
22.12.2018

csongor123

26 October 2021 22:34
- how to authorize the program?

registered
6.08.2018

dheat2600

27 October 2021 02:29
- mine aint authorize used keygen yall talkin bout

registered
23.01.2018

Twisted

27 October 2021 07:09
- Authorize?

registered
22.01.2018

nick_b

27 October 2021 14:28
- From the sistersite : do not use roll back to 2.6.
  they tested 2.7 and 2.8 and the timebomb is not solved.

registered
22.09.2020

HIFIDELITY

27 October 2021 19:11
- hello, this worked for me on mac os big sur, you need the keygen from 2.6 version:
  
  Run Omnisphere, click on the blue 'click here' at the bottom of the Authorization screen ; this will copy an Authorization url to the clipboard which contains the encoded Challenge Code
  
  Now go to https://www.urldecoder.org/ and paste that Authorization url into the topmost frame
  - delete the segment 'http://www.spectrasonics.net/authorization?prod=Omnisphere&vers=2.6.4c&ch
  ='
  and hit the <Decode> button
  
  Run R2R's Keygen, paste the decoded Challenge Code and generate your Response Code

registered
28.01.2018

bendo

27 October 2021 19:24
- it's work for me!!
  
  1. Manually install the update first + copy the component or vst in a right place "library/audio/plug-ins/etc..." + in a "folder" on your desktop
  
  2. run your daw and Run Omnisphere, click on the blue 'click here' at the bottom of the Authorization screen - this will copy an Authorization url to the clipboard which contains the encoded Challenge Code
  
  3.Go to https://www.urldecoder.org/ and paste that Authorization url into the topmost frame
  - delete the segment 'http://www.spectrasonics.net/authorization?prod=Omnisphere&vers=2.6.4c&ch
  ='
  and hit the <Decode> button
  
  4. Run R2R's Keygen 2048, paste the decoded Challenge Code and generate your Response Code and patch your file component or vst in your desktop "contents/macos/omnisphere
  
  ps: after patching the component or vst don't forget to drag and drop in the right location :)

registered
9.10.2021

jmacie

28 October 2021 05:31
- if all I have is the very 1st libraries but no program can I just use this program or do I have to go back to the earliest program versions and upgrade each release to this one? Thank you

registered
23.01.2018

Twisted

28 October 2021 09:09
- For me it works only for the vst3 and not standalone and vst2!?
  
  Succeeded afterall!
  Thanks!

registered
2.02.2018

f3kf3k

28 October 2021 15:39
- bendo nice guide

registered
29.01.2018

Joomer

28 October 2021 21:02
- It does not work. The old keygens don't work. Please help.

registered
4.12.2020

egonkrenz

28 October 2021 22:31
- it updated the software and soundbank okay then asked for a new registration number. i tried rolling it back without success. now i can’t use any omnisphere. is there a keygen that works on windows?

registered
29.01.2018

esmog73

2 November 2021 07:49
- thx to Bendo... this work perfect!
  
  Quote: bendo
  it's work for me!!
  
  1. Manually install the update first + copy the component or vst in a right place "library/audio/plug-ins/etc..." + in a "folder" on your desktop
  
  2. run your daw and Run Omnisphere, click on the blue 'click here' at the bottom of the Authorization screen - this will copy an Authorization url to the clipboard which contains the encoded Challenge Code
  
  3.Go to https://www.urldecoder.org/ and paste that Authorization url into the topmost frame
  - delete the segment 'http://www.spectrasonics.net/authorization?prod=Omnisphere&vers=2.6.4c&ch
  ='
  and hit the <Decode> button
  
  4. Run R2R's Keygen 2048, paste the decoded Challenge Code and generate your Response Code and patch your file component or vst in your desktop "contents/macos/omnisphere
  
  ps: after patching the component or vst don't forget to drag and drop in the right location :)
  
  Quote: bendo
  it's work for me!!
  
  1. Manually install the update first + copy the component or vst in a right place "library/audio/plug-ins/etc..." + in a "folder" on your desktop
  
  2. run your daw and Run Omnisphere, click on the blue 'click here' at the bottom of the Authorization screen - this will copy an Authorization url to the clipboard which contains the encoded Challenge Code
  
  3.Go to https://www.urldecoder.org/ and paste that Authorization url into the topmost frame
  - delete the segment 'http://www.spectrasonics.net/authorization?prod=Omnisphere&vers=2.6.4c&ch
  ='
  and hit the <Decode> button
  
  4. Run R2R's Keygen 2048, paste the decoded Challenge Code and generate your Response Code and patch your file component or vst in your desktop "contents/macos/omnisphere
  
  ps: after patching the component or vst don't forget to drag and drop in the right location :)

registered
14.02.2019

inkredibeatz

11 November 2021 19:10
- MAN you are a life saver! Follow this method & it will work. Thank you!
  
  [quote=bendo]it's work for me!!
  
  1. Manually install the update first + copy the component or vst in a right place "library/audio/plug-ins/etc..." + in a "folder" on your desktop
  
  2. run your daw and Run Omnisphere, click on the blue 'click here' at the bottom of the Authorization screen - this will copy an Authorization url to the clipboard which contains the encoded Challenge Code
  
  3.Go to https://www.urldecoder.org/ and paste that Authorization url into the topmost frame
  - delete the segment 'http://www.spectrasonics.net/authorization?prod=Omnisphere&vers=2.6.4c&ch
  ='
  and hit the <Decode> button
  
  4. Run R2R's Keygen 2048, paste the decoded Challenge Code and generate your Response Code and patch your file component or vst in your desktop "contents/macos/omnisphere
  
  ps: after patching the component or vst don't forget to drag and drop in the right location :)[/quote]
  [quote=bendo]it's work for me!!
  
  1. Manually install the update first + copy the component or vst in a right place "library/audio/plug-ins/etc..." + in a "folder" on your desktop
  
  2. run your daw and Run Omnisphere, click on the blue 'click here' at the bottom of the Authorization screen - this will copy an Authorization url to the clipboard which contains the encoded Challenge Code
  
  3.Go to https://www.urldecoder.org/ and paste that Authorization url into the topmost frame
  - delete the segment 'http://www.spectrasonics.net/authorization?prod=Omnisphere&vers=2.6.4c&ch
  ='
  and hit the <Decode> button
  
  4. Run R2R's Keygen 2048, paste the decoded Challenge Code and generate your Response Code and patch your file component or vst in your desktop "contents/macos/omnisphere
  
  ps: after patching the component or vst don't forget to drag and drop in the right location :)[/quote][/quote]

registered
24.12.2020

stuntmanjoe94

15 November 2021 11:40
- Hello everyone,
  I have a couple of questions:
  i am on Big Sur and I have Omnisphere 2.6
  To update I have followed the guida so I have installed the update saved components,vst,vst3 on desktop. did everything with the encode. When I open Omnisphere without replacing the files and I paste the code it says that the code is good but and restart but when I do it I get again the activation page.
  If I copy vst etc I get message that can't open due to damaged file .
  How can I solve it?
  Thanks
  Gioele

Spectrasonics Omnisphere Software and Patches Update v2.8.0d / v2.8.0c [WiN, MacOSX]

Comments

Information